Welcome To P8ntballer.com
The Home Of European Paintball
Sign Up & Join In

Angel Al fly

shogun666

Platinum Member
Nov 20, 2005
397
46
38
norwich
Got the above and it won't air up, there's just enough air to make the solinoid pop, I've took it all apart to see what's blocked but can't see any obstruction?
 

Evil Rich

Platinum Member Lifetime PMGWC #101
May 22, 2008
1,885
705
148
Northumberland
Check your solenoid, if it has a slight indentation where the grub screw holds it in place (metal strip, to protect it, maybe missing or dented) the solenoid internals could be crushed and therefore toast.

This is a worst case scenario
 

Fenix_Sweden

Long time baller
Nov 7, 2015
56
29
28
45
Halmstad, Sweden
I had the same problem with my A1 fly, the gun aired up with no leaks but when i pulled the trigger with eye:s off it just clicked in the solenoid, didnt cycle at all. It was like Evil Rish said, a small indent on top of the solenoid, i removed the chasing of the solenoid and tried to get the piston out, it wouldnt move at all without serious force. Had to buy a new solenoid.