Taking apart a traccer

[SamFlyZ]

After blasting pods outta my traccer, I think it's time to look inside.

But where do I start?

Someone help me out here??

,Sam

 

[jack_judge]

unscrew the pump arms the frame screws and undo the barrel slide it all out and remember how it cam out clean it lube it put it back in

 

[SamFlyZ]

The pump screws, with what? I can't get em to budge at all...

 

[tomo110290]

mine were finger tight use some pliers or mole grips to get them off but make sure put something in the pliers to stop them scraching the traccer

 

[jack_judge]

They have screwdriver slots

 

[SamFlyZ]

I've tried a pair of pilars and screwdrivers. No movement...

 

[John C]

I think that means you dont qualify to look inside a trracer.

 

[SamFlyZ]

I think that means you dont qualify to look inside a trracer.

I had to use a vice to get it open. Looking at the threads they were coated in something like loctite. Whyyyy?

 

[outkastmike]

I had to use a vice to get it open. Looking at the threads they were coated in something like loctite. Whyyyy?

Pump arm screws always had a nasty habit of unscrewing themselves due to the vibration & motion of the pump handle,hence the loctite

 

[SamFlyZ]

Pump arm screws always had a nasty habit of unscrewing themselves due to the vibration & motion of the pump handle,hence the loctite

Kk, useful info